Inspection and packaging process steps of Dongguan terminal wire finished products
This article mainly explains the inspection and packaging process steps of Dongguan terminal wire products. The inspection and packaging process steps of terminal wire products are generally divided into the following 5 parts: 1. Terminal wire electrical property inspection → 2. Terminal wire appearance inspection → 3. Terminal Wire subassembly → 4. Terminal wire assembly → 5. Terminal wire packaging.
1. Dongguan terminal wire electrical testing
Use a standard wire testing machine to test the terminal wire's withstand voltage, impedance, short circuit and other properties of the crimped terminal wire. After the inspection is OK, it will flow to the next inspection process.
2. Appearance inspection of Dongguan terminal line
Use a light magnifying glass to check whether there are any defects in the finished terminal wire of the electrical inspection OK, or use the naked eye to check whether some appearance parts meet the standard, whether there is a lack of accessories, etc. After checking, it will flow to the next terminal wire packaging process.
3. Dongguan terminal line sub-assembly
The finished terminal wire that has been checked is sub-packaged according to the requirements of the sub-assembly process, that is, the terminal part of the terminal wire is inserted into the sheath to complete the sub-assembly process of the terminal wire.
4. Dongguan terminal wire assembly
The sub-packaged finished product is assembled according to the circuit direction on the terminal wire specification process drawing board, that is, bundled with tape or pull tape to complete the assembly process of the terminal wire.
5. Dongguan terminal wire packaging
Arrange the assembled terminal wires neatly and pack them according to the specifications of the terminal wires, such as: 500PCS/box, 50PCS/bar, 5 bars/bag, 2 bags/box, etc.; The box mouth is sealed and affixed with the terminal wire product label of the wire harness manufacturer. After completing the above five inspection and packaging processes, the terminal wire products can be shipped.